Free scoping read. A written assessment of your manuscript in two business days, at no cost.

Start one
Contents

AcademyResearch Service

Guide

How to Write the Methods Section of a Research Paper by Study Design: Cohort, Trial, Diagnostic, Qualitative and Prediction-Model Studies

A research paper methods section must show what you did and why each decision was appropriate, so readers can judge bias and reproducibility. Use one framework for every paper, then add the detail your design demands.

Dr. CharlieSenior Medical WriterPublishedReading time7 minutesSources12
  • Research methods
  • Reporting guidelines
  • Manuscript writing

At a glanceResearch Service

Framework
Design, data, decisions, analysis, credibility
Cohort / trial
STROBE / CONSORT 2025
Diagnostic / qualitative
STARD 2015 / COREQ, SRQR
Prediction model
TRIPOD+AI

Talk to our research expertsDiscuss your project

Quick answer

  • Explain what was done and why, in enough detail for another researcher to repeat it.
  • Organise every methods section around design, data, decisions, analysis and credibility.
  • Add the design-specific detail reviewers check: follow-up, allocation, reference standard, reflexivity or validation.

Why the methods section decides how your paper is judged

A research paper methods section lets readers assess bias, follow the analysis and judge reproducibility. Because requirements differ by design, the most reliable approach to how to write the methods section of a research paper is a consistent framework plus design-specific detail.

What should a research paper methods section include?

A practical way to organise research methodology writing is a five-part methods framework: design, data, decisions, analysis and credibility. It is an editorial aid, not a validated reporting standard.

  • Design: research question, study design, setting and period.
  • Data: participant selection, eligibility, recruitment, data sources and measurements.
  • Decisions: outcomes, exposures, predictors, exclusions and why key choices were made.
  • Analysis: statistical models or qualitative procedures, assumptions and missing-data methods.
  • Credibility: how bias, uncertainty, validation and reproducibility were addressed.

Report what was done, separate prespecified from exploratory analyses and keep results out of the methods.

From a vague method to a reproducible one

Weak: “Data were analysed using regression.”

Better: “Multivariable logistic regression estimated adjusted odds ratios with 95% confidence intervals for the association between exposure and the binary outcome. Covariates were prespecified from subject-matter knowledge. Missing covariate values were handled by multiple imputation by chained equations, with estimates combined using Rubin’s rules.”

The better version names the model, effect measure, interval, covariate rationale and missing-data method. A full report also gives the imputation assumptions and diagnostics, which published studies often omit1.

How to write a cohort study methods section

A cohort study methods section should say whether the design was prospective or retrospective and explain cohort entry, eligibility, data sources, exposure and outcome measurement, and follow-up. Define outcomes explicitly and report losses to follow-up and censoring.

Name the effect measure and model (risk, rate, odds or hazard ratio). Select confounders from subject-matter knowledge and a causal framework rather than statistical significance, describe how survival-model assumptions were checked, and report subgroup and sensitivity analyses.

What a reviewer will ask: could loss to follow-up, misclassification or inappropriate adjustment have distorted the association? STROBE supports reporting of cohort, case-control and cross-sectional studies; it improves completeness but does not prescribe the right analysis2.

Want your methods section reviewer-ready?

Pubrica’s research writers, statisticians and editors make your design, methodology and analysis clear, reproducible and aligned with STROBE, CONSORT, STARD, COREQ or TRIPOD+AI.

How to write a clinical trial methods section

A clinical trial methods section must make the intervention, comparator, allocation and planned comparison transparent. State the design (parallel-group, crossover, cluster-randomised), setting, eligibility, recruitment period, and the intervention and comparator with dose, frequency and duration; incomplete treatment descriptions are common and block replication3. For randomised trials, report sequence generation, allocation concealment and blinding, because inadequate concealment is associated with exaggerated treatment effects4.

Report the sample-size calculation and its assumptions (target effect, significance level, power and attrition). Specify the primary outcome, analysis population and, where relevant, the estimand, including how intercurrent events and missing outcomes were handled, plus multiplicity, interim analyses and stopping rules.

What a reviewer will ask: does the sample-size calculation match the primary outcome, and is allocation transparent? CONSORT 2025 and its extensions guide trial reporting5.

How to write diagnostic accuracy study methods

Diagnostic accuracy studies evaluate how well an index test identifies a target condition against a reference standard. Define all three, then explain participant selection, test procedures, thresholds and interpretation criteria, whether assessors were blinded, the interval between tests and how indeterminate or missing results were handled. Explain the sampling strategy: recruiting clearly diseased and clearly healthy people (a case-control design) inflates accuracy beyond what the intended clinical population would show6.

Name the planned measures: sensitivity and specificity, positive and negative predictive values, likelihood ratios and the area under the ROC curve (AUC). State how confidence intervals were calculated and whether thresholds were prespecified (predictive values depend on prevalence).

What a reviewer will ask: could participant selection or an unsuitable reference standard have biased the estimates? STARD 2015 supports transparent reporting7.

How to write a qualitative research methods section

Name the methodological approach (phenomenology, grounded theory, ethnography or qualitative description) and why it fits. Describe recruitment, sampling strategy and participant characteristics, and justify sample adequacy against the question and methodology rather than a universal number.

Specify the data source (interviews, focus groups, observation or documents), who collected it and how recordings were transcribed. Describe coding, theme development and how analysts handled contradictory accounts. Address reflexivity: how the researchers’ backgrounds and relationships with participants may have shaped the findings.

What a reviewer will ask: is the analysis transparent, and is reflexivity addressed? COREQ suits interviews and focus groups8; SRQR covers qualitative approaches more broadly9.

How to write a prediction model methods section

A prediction model methods section must show how predictions were generated and that evaluation did not reuse development data inappropriately. Describe the population, data source, outcome, prediction horizon and predictor selection. Report the sample-size rationale, missing-data handling, feature selection and model type (regression, survival or machine learning).

Explain the validation strategy and how model selection and hyperparameter tuning were done. Reusing the same observations for fitting, tuning and evaluation gives optimistic estimates, and bootstrapping generally gives more stable internal validation than split samples10. Then report three distinct dimensions:

  • Discrimination: how well the model separates people who have the outcome from those who do not.
  • Calibration: how closely predicted risks match observed outcomes.
  • Clinical utility: whether model-guided decisions could improve on alternatives, where relevant.

Give performance measures with uncertainty, calibration plots and the final model specification. What a reviewer will ask: was evaluation independent of development and tuning? TRIPOD+AI replaces TRIPOD 2015 for prediction models built with regression or machine learning11.

Which reporting guideline should you use?

When structuring a methods section by study design, choose the reporting guideline that matches the design and objective, then check relevant extensions and the target journal’s instructions. The EQUATOR Network library lists them all12.

Table 1. Which reporting guideline fits your design

Study designReporting guidelineKey reporting priorities
Cohort studySTROBEParticipants, exposures, outcomes, confounding, follow-up
Randomised trialCONSORT 2025 and extensionsAllocation, interventions, outcomes, analysis
Diagnostic accuracySTARD 2015Index test, reference standard, accuracy estimates
Qualitative interviews or focus groupsCOREQResearch team, data collection, analysis
Broader qualitative researchSRQRApproach, context, analysis, interpretation
Prediction modelTRIPOD+AI and extensionsPredictors, development, validation, performance

Reporting quality is not methodological quality: a checklist shows what is missing, not that the design or analysis is valid.

Practical methods section checklist

Use this checklist to find omissions, adapted to your design: randomisation matters for trials, calibration for prediction models.

Methods section checks

  • Design identified and justified; participants, eligibility, recruitment and sampling explained.
  • Measurements, data collection, outcome definitions and assessment times explicit.
  • Sample-size calculation or rationale reported where appropriate.
  • Exclusions, covariates and analytical choices justified; assumptions explained.
  • Missing data and how it was handled described.
  • Ethics approval, consent and registration reported where applicable.
  • Software, protocol, code or data-access details provided.
  • The matching reporting guideline and its extensions consulted.

Pubrica team verdict

Knowing how to write the methods section of a research paper means linking the question to the design, data, analytical decisions and evidence of credibility. Before submission, check that another researcher could repeat what you did and that the matching guideline reveals no gaps.

Frequently asked questions

The design, participants and data, key analytical decisions, the analysis itself and how bias, uncertainty and reproducibility were addressed.

No. Guidelines improve completeness; validity depends on the design and analysis themselves.

Sources

Sources were checked on 26 October 2026. Requirements and guidance may change after that date; confirm the current version with the issuing body.

  1. 1Hayati Rezvan P, Lee KJ, Simpson JA. The rise of multiple imputation: a review of the reporting and implementation of the method in medical research. BMC Med Res Methodol. 2015;15:30. https://doi.org/10.1186/s12874-015-0022-1
  2. 2von Elm E, Altman DG, Egger M, Pocock SJ, Gøtzsche PC, Vandenbroucke JP; STROBE Initiative. The Strengthening the Reporting of Observational Studies in Epidemiology (STROBE) statement: guidelines for reporting observational studies. PLoS Med. 2007;4(10):e296. https://doi.org/10.1371/journal.pmed.0040296
  3. 3Glasziou P, Meats E, Heneghan C, Shepperd S. What is missing from descriptions of treatment in trials and reviews? BMJ. 2008;336(7659):1472–1474. https://doi.org/10.1136/bmj.39590.732037.47
  4. 4Schulz KF, Chalmers I, Hayes RJ, Altman DG. Empirical evidence of bias: dimensions of methodological quality associated with estimates of treatment effects in controlled trials. JAMA. 1995;273(5):408–412. https://doi.org/10.1001/jama.1995.03520290060030
  5. 5Hopewell S, Chan AW, Collins GS, et al. CONSORT 2025 statement: updated guideline for reporting randomised trials. BMJ. 2025;389:e081123. https://doi.org/10.1136/bmj-2024-081123
  6. 6Lijmer JG, Mol BW, Heisterkamp S, et al. Empirical evidence of design-related bias in studies of diagnostic tests. JAMA. 1999;282(11):1061–1066. https://doi.org/10.1001/jama.282.11.1061
  7. 7Bossuyt PM, Reitsma JB, Bruns DE, et al. STARD 2015: an updated list of essential items for reporting diagnostic accuracy studies. BMJ. 2015;351:h5527. https://doi.org/10.1136/bmj.h5527
  8. 8Tong A, Sainsbury P, Craig J. Consolidated criteria for reporting qualitative research (COREQ): a 32-item checklist for interviews and focus groups. Int J Qual Health Care. 2007;19(6):349–357. https://doi.org/10.1093/intqhc/mzm042
  9. 9O’Brien BC, Harris IB, Beckman TJ, Reed DA, Cook DA. Standards for reporting qualitative research: a synthesis of recommendations. Acad Med. 2014;89(9):1245–1251. https://doi.org/10.1097/ACM.0000000000000388
  10. 10Steyerberg EW, Harrell FE Jr, Borsboom GJ, Eijkemans MJ, Vergouwe Y, Habbema JD. Internal validation of predictive models: efficiency of some procedures for logistic regression analysis. J Clin Epidemiol. 2001;54(8):774–781. https://doi.org/10.1016/S0895-4356(01)00341-9
  11. 11Collins GS, Moons KGM, Dhiman P, et al. TRIPOD+AI statement: updated guidance for reporting clinical prediction models that use regression or machine learning methods. BMJ. 2024;385:e078378. https://doi.org/10.1136/bmj-2023-078378
  12. 12EQUATOR Network. Library for health research reporting. https://www.equator-network.org/library/

how to write the methods section of a research paperresearch paper methods sectionresearch methodology writingmethods section by study designcohort study methods sectionclinical trial methods section

How to cite this article

Pick your referencing style and copy it. Your university or target journal may vary the punctuation, so check its guide if it has one.

Dr. Charlie. (2026, October 26). How to Write the Methods Section of a Research Paper by Study Design: Cohort, Trial, Diagnostic, Qualitative and Prediction-Model Studies. Pubrica. https://pubrica.com/academy/research-service/write-methods-section-research-paper/

This article is written to be learned from. Cite it if you are referring to what it says; if you are using the evidence behind it, cite the sources listed above instead.

Get a free quote

Regulations

Check your project against this rule

  1. 1Your work
  2. 2Your details
  3. 3Send
What do you need?

Material you send is held under signed confidentiality, with access limited to the assigned team and encrypted transfer. It is not used to train anything and is not passed to third-party tools. Ask for the agreement before you send anything you would rather cover first.