Free scoping read. A written assessment of your manuscript in two business days, at no cost.

Start one
Contents

Academy · Checklists · SQUIRE checklist

SQUIRE 2.0 Expects a Quality-Improvement Project to Show Its Own Evolution, Not Just Its Result

SQUIRE 2.0 is the 18-item guideline for reporting healthcare quality-improvement work, distinct from EBPQI (built specifically on an evidence-appraisal process) and from CONSORT (for randomised trials).

Pubrica AcademyWritten by the medical writing and biostatistics teams Reviewed byPubrica biostatistics team Published8 October 2026 Last checked8 October 2026 Reading time6 minutes

SQUIRE stands for Standards for QUality Improvement Reporting Excellence. The current version, SQUIRE 2.0, was published in 2015 by Greg Ogrinc, Louise Davies, Daisy Goodman, Paul Batalden, Frank Davidoff and David Stevens in BMJ Quality & Safety, revising the original 2008 SQUIRE guideline after a detailed, multi-round consensus process.

What it is

Ogrinc G, Davies L, Goodman D, Batalden PB, Davidoff F, Stevens D. “SQUIRE 2.0 (Standards for QUality Improvement Reporting Excellence): Revised Publication Guidelines from a Detailed Consensus Process.” BMJ Quality & Safety 2015;25:986–992.

Quality-improvement work had been reported inconsistently enough that readers often could not tell what was actually implemented, in what context, or how outcomes were measured — making QI findings hard to replicate or adapt elsewhere. SQUIRE gives authors a shared structure for the problem, the intervention, its local context, and the evidence linking it to any observed outcome.

Studies describing healthcare quality-improvement work — interventions intended to improve quality, safety, efficiency, equity or value of care, where local context and iterative refinement are central — not classic randomised controlled trials, though some QI evaluations borrow trial-like designs within a QI framing.

Is this the right tool?

Use it when

Clinicians, improvement scientists and multidisciplinary QI teams writing up a project, from planning through submission. It also helps teams designing a project with eventual publication in mind, since items like context and measures are easier to report well if planned for from the start.

Not the right tool when

A randomised trial testing a clinical intervention should use CONSORT even if it runs inside a healthcare-delivery setting. A purely observational study with no deliberate intervention should use STROBE. SQUIRE also assumes a defined measurement plan linking intervention to outcome — it is a poor fit for a narrative case description with no measured outcomes, and it is a reporting guideline, not a QI methodology (it does not replace PDSA, Lean or Six Sigma).

The checklist

18 numbered items, several with lettered sub-parts, across six sections.

Title, abstract and introduction

ItemWhat it requires
1–2. Title and abstractIndicate the paper reports a healthcare-improvement effort; give a searchable, informative summary.
3–6. IntroductionThe local problem, available knowledge, rationale/theory, and specific aims.

Methods

ItemWhat it requires
7. ContextContextual factors considered important when the intervention was introduced.
8. Intervention(s)Enough detail to reproduce it, and who was on the team.
9. Study of the intervention(s)How impact was assessed, and how it was determined outcomes were caused by the intervention.
10. MeasuresProcess/outcome measures with validity rationale; tracking of context over time; data-quality checks.
11. AnalysisMethods used to draw inferences, including how variation and time effects were examined.
12. Ethical considerationsEthical issues, review, and conflicts of interest.

Results, discussion and funding

ItemWhat it requires
13. ResultsThe intervention’s evolution, process/outcome details, context interactions, associations, unintended consequences, missing data.
14–17. DiscussionSummary against aims; interpretation and comparison with other work; limitations; conclusions on sustainability and spread.
18. FundingFunding sources and the funder’s role.

Applying it, with the evidence

A systematic survey of 100 neonatology QI articles found they reported a mean of only 22.0 of 31 modified SQUIRE 2.0 items, with item-level reporting ranging from 26% to 100% across the checklist. The single least-reported item — “details about missing data,” present in just 26% of articles — matters because QI projects routinely have incomplete process or outcome data as units move through a care pathway; without that detail, a reader cannot tell whether a reported improvement reflects a real change in care or just gaps in what got measured. The same audit found journal endorsement of SQUIRE 2.0 was itself associated with measurably better reporting.

SQUIRE 2.0 is the standard for quality-improvement studies in healthcare delivery — hospital process-improvement projects, patient-safety initiatives, care-pathway redesigns, and QI work in specific clinical areas such as neonatology, surgery and infection prevention. It differs from EBPQI and PRISMA: SQUIRE is built around a local team designing, implementing and studying its own intervention within a system, not synthesising external evidence.

In order

Confirm it is genuinely QIA deliberate intervention in a local system, studied for impact — not a trial or pure observational study.
Draft Methods around the SQUIRE structureContext, Intervention, Study of the Intervention, Measures, Analysis, Ethics — rather than retrofitting headers onto an existing narrative.
Show the intervention’s evolution in ResultsItem 13a expects iterative refinement to be visible, unlike a fixed-protocol trial.
Report unintended consequences and missing data explicitlyItems 13e and 13f, rather than only favourable outcomes.

Where it goes right

With it — no verifiable example found

Our research for this page did not turn up a named, checkable published paper that explicitly credits this checklist for a well-reported study. Rather than invent one, we are saying so. If you know of one, the EQUATOR Network page for this guideline is the place such examples tend to get collected.

Common mistakes

  • Context (item 7) and the intervention’s evolution over time (13a) are the most commonly thin sections. Both limit other teams’ ability to judge transferability.
  • Rationale (item 5) is often skipped. Reports read as “we did X and Y improved” without the mechanism SQUIRE asks for.
  • Favourable-outcomes-only reporting omits unintended consequences. Item 13e exists specifically to close this gap.

Where it falls short

Without it — Thabane et al. 2021, 100 neonatology QI articles

From 1,921 citations screened down to 336 eligible studies, 100 neonatology QI articles (2016–2020) were scored against 31 modified SQUIRE 2.0 items. Mean reporting was 22.0 items (SD 4.5) of 31; the most-reported item was the local problem’s name and significance (100%); the least-reported was details about missing data (26%). Reporting was consistently weakest for QI-specific elements — contextual factors, the effect of time, and impact on people and systems — and journal endorsement of SQUIRE 2.0 was associated with better reporting (IRR 1.11, 95% CI 1.02–1.21, p=0.015).

Thabane L, Mbuagbaw L, Hu ZJ, et al. “Completeness of reporting of quality improvement studies in neonatology is inadequate: a systematic literature survey.” BMJ Open Quality, 2021;10(2):e001350. PMC8204179.

Common questions

No. It asks authors to describe whatever method was used to link outcomes to the intervention (item 9), which may or may not involve a formal comparator.

If the framing is QI (local system change, iterative), SQUIRE is appropriate; some authors also report design-specific statistical detail alongside it. Check the target journal’s instructions.

GoodReports.org hosts an interactive SQUIRE 2.0 checklist; the authoritative wording is the official PDF on the EQUATOR Network.

References and sources

  1. Ogrinc G, Davies L, Goodman D, Batalden PB, Davidoff F, Stevens D. SQUIRE 2.0: Revised Publication Guidelines from a Detailed Consensus Process. BMJ Quality & Safety 2015;25:986–992. read 8 October 2026. qualitysafety.bmj.com
  2. EQUATOR Network. SQUIRE 2.0 checklist. read 8 October 2026. equator-network.org

Each source carries the date it was last read. Where a standard moves, this article is revised rather than left up with a note.

How to cite this article

Pick your referencing style and copy it. Your university or target journal may vary the punctuation — check its guide if it has one.

Pubrica Academy. (2026, October 8). SQUIRE 2.0 Expects a Quality-Improvement Project to Show Its Own Evolution, Not Just Its Result. Pubrica. https://pubrica.com/insights/checklist/squire-quality-improvement-checklist/

This article is written to be learned from. Cite it if you are referring to what it says; if you are using the evidence behind it, cite the sources listed above instead.

Pubrica AcademyWritten and maintained by the subject matter experts of Pubrica who do this work. Articles are revised when the standard underneath them moves, and each one carries the date it was last checked.

How Pubrica helps

Pubrica’s medical writing team structures QI manuscripts to SQUIRE 2.0’s six sections from the planning stage, so context and the intervention’s evolution are captured as the project runs, not reconstructed afterward.

Find something else

Search the rest of the Academy.

Open with no account. Type what you are working on, or open the full library to filter by category, sub-topic or resource type.

Bring us the project while it is still running.

A scoping read costs nothing and takes two business days. You get a written view of what the work needs and who would hold it.

Get a free quote

Regulations

Check your project against this rule

  1. 1Your work
  2. 2Your details
  3. 3Send
What do you need?

Material you send is held under signed confidentiality, with access limited to the assigned team and encrypted transfer. It is not used to train anything and is not passed to third-party tools. Ask for the agreement before you send anything you would rather cover first.