Free scoping read. A written assessment of your manuscript in two business days, at no cost.

Start one

ConferenceEngineering and technology · Singapore

13th International Conference on Materials for Advanced Technologies

The 13th International Conference on Materials for Advanced Technologies (ICMAT 2027), organised by the Materials Research Society of Singapore, takes place in Singapore from 5 to 9 July 2027 with 39 symposia and invites original-research abstracts. This guide covers topic areas consistent with the conference scope, readiness checks, what abstract reviewers typically value and how to prepare a submission before the 15 January 2027 deadline.

Pubrica InsightsEditorial team, reviewed by a subject specialist
Next deadline
15 January 2027
Last checked
10 November 2026
Organiser
Materials Research Society of Singapore
Sources
1
Submit an abstract

Key dates

Abstract deadline
15 January 2027
Full paper deadline
Abstracts only, or not stated
Conference dates
5 July 2027 – 9 July 2027
Details last checked
10 November 2026
Submit an abstract

About the conference

Conference
13th International Conference on Materials for Advanced Technologies
Organiser
Materials Research Society of Singapore
Venue
Singapore
Scope
Materials science conference with 39 symposia, inviting original-research abstracts until 15 January 2027.
Submission types
Abstracts; confirm formats and word limits on the official page

Topics consistent with the programme

  • Materials for energy generation, storage and conversion
  • Nanomaterials, two-dimensional materials and their applications
  • Electronic, photonic and quantum materials for next-generation devices
  • Biomaterials and materials for medical devices and healthcare
  • Sustainable materials, recycling and green processing
  • Computational materials science and data-driven materials design

Based on the published scope; the official page sets out the full themes and requirements.

Is your work a fit? Check before you submit

  1. Confirm that the work is original materials research within one of the conference symposia.
  2. Identify the most suitable symposium among the 39 listed on the conference website.
  3. Ensure the abstract reports results with clear synthesis, characterisation or modelling methods.
  4. Check abstract format and submission rules on the official ICMAT 2027 call for abstracts.
  5. Prepare a complete, co-author-approved abstract before 15 January 2027.

Why This Conference Matters

Advances in energy, electronics, healthcare and sustainability depend on new materials and on understanding how structure and processing determine performance. ICMAT brings together researchers from many materials subfields in one meeting, organised into a large number of symposia. Presenting there allows authors to reach both specialists in their symposium and researchers in neighbouring areas, which can open collaborations across chemistry, physics, engineering and life sciences.

Who Should Submit

Academic backgrounds

  • Materials science and engineering
  • Chemistry
  • Physics
  • Chemical engineering
  • Nanotechnology

Institutions and sectors

  • Universities and materials research groups
  • National research institutes and laboratories
  • Electronics, energy and manufacturing companies
  • Start-ups developing advanced materials

What Reviewers Typically Value

  1. New materials or processing routes with clearly demonstrated properties.
  2. Mechanistic insight linking structure, composition and performance.
  3. Thorough characterisation supporting the conclusions drawn.
  4. Results with a clear connection to a technological application or challenge.

Ideas You Could Develop

Stable electrode materials for batteriesA study of a modified electrode material that improves cycling stability in rechargeable batteries.
Low-temperature synthesis of 2D materialsAn abstract reporting a scalable route to grow two-dimensional materials at lower processing temperatures.
Machine learning for materials screeningA computational study using data-driven models to identify candidate materials for a target property.

Your Plan to the Deadline

A suggested schedule working back from 15 January 2027. Adjust it to the stage your work has reached.

  1. By 4 Dec 2026

    Open the official call for abstracts; confirm the tracks, word limit, format and author rules.

  2. By 18 Dec 2026

    Agree the key result, the authors and the presenting author.

  3. By 1 Jan 2027

    Draft the structured abstract to the word limit, with results stated as numbers.

  4. By 8 Jan 2027

    Circulate to co-authors and an independent reader; revise.

  5. By 13 Jan 2027

    Final checks: title, author affiliations, conflicts of interest and track selection.

  6. By 15 Jan 2027

    Submit through the official abstract system before the deadline.

What you gain

  • Feedback from peers working on the same questions.
  • A citable abstract or proceedings paper.
  • Contacts for collaboration, employment and future funding.
  • A step towards a full journal article.

What happens after you submit

  1. Acknowledgement: the abstract system confirms receipt; keep the submission number.
  2. Review: the scientific committee scores abstracts against the track criteria.
  3. Decision: accepted abstracts are assigned to an oral, poster or e-poster session.
  4. Registration: presenting authors usually must register by a stated date.
  5. Publication: accepted abstracts or papers may appear in the conference proceedings or journal supplement.

What the Organisers Are Looking For

The conference seeks original-research abstracts across its 39 symposia in materials science. Strong submissions typically present new results, describe methods and characterisation clearly and connect findings to an application or scientific question relevant to the chosen symposium. Symposium topics and submission requirements should be confirmed on the official ICMAT 2027 call for abstracts.

Read the official pageThis guide summarises the opportunity. Confirm deadlines, eligibility and requirements on the official page before you plan your work, and record the date you checked it.Open the official page

Expert help

How Pubrica Can Help

Pubrica’s subject specialists can help you prepare the abstract, full paper, poster or slides, planned back from the deadline. You remain the author of your work.

Abstract writingA structured abstract written to the conference’s word limit and format. Full paper writingFull conference papers written to the proceedings template. Poster preparationScientific posters designed to the conference’s size and layout rules. Presentation slidesOral presentation slides prepared for the allotted time. Editing and proofreadingSubject-specialist editing of abstracts and papers before submission. BiostatisticsStatistical analysis and review of results.
Go to the official page

FAQs

Questions Researchers Ask

The next published deadline is 15 January 2027. Dates can change, so confirm them on the official page before you plan your work.

With 39 symposia, some overlap between topics is likely. Read the symposium descriptions on the ICMAT 2027 website and choose the one that best matches the main contribution of your work, contacting the organisers if the choice remains unclear.

The official page lists abstract submission; check it for any full paper or proceedings option.

Yes. Pubrica’s specialists can review, write, edit and format your abstract, paper, poster or slides. You remain the author and the person responsible for the submission.

Sources

  1. Materials Research Society of Singapore. (2026). 13th International Conference on Materials for Advanced Technologies. Retrieved 10 November 2026, from https://icmat2027.mrs.org.sg/call-for-abstract/

How to cite this page

Pubrica Insights. (2026). 13th International Conference on Materials for Advanced Technologies. Pubrica. https://pubrica.com/insights/calls-and-conferences/13th-international-conference-on-materials-for-advanced-technologies/

  • ICMAT
  • Materials science
  • Nanomaterials
  • Singapore
  • Abstracts

Other Open Conferences

Closes 16 November 202636th Annual Meeting of the Asian Pacific Association for the Study of the Liver (APASL 2027)Australia Closes 18 November 2026ESCMID Global 2027Sweden Closes 19 November 2026ESC Preventive Cardiology 2027Portugal

All calls, conferences and fundingAbstract writing

ICMAT 2027Next deadline 15 January 2027

Official page
Get a free quote

Regulations

Check your project against this rule

  1. 1Your work
  2. 2Your details
  3. 3Send
What do you need?

Material you send is held under signed confidentiality, with access limited to the assigned team and encrypted transfer. It is not used to train anything and is not passed to third-party tools. Ask for the agreement before you send anything you would rather cover first.