Free scoping read. A written assessment of your manuscript in two business days, at no cost.

Start one
Contents

Academy · Research Publication · Paper Mills

Paper Mills: The Industrial-Scale Threat Underlying Fabricated Papers in Scientific Publishing

A 2022 study in the BMJ traced retracted papers to specific commercial paper mills and found that they operate at a scale that detection based on individual cases was not designed to address, with templated manuscripts sold or resold across dozens of journals and interchangeable author lists. This article examines that evidence and the detection infrastructure developed in response.

Pubrica AcademyWritten by a research fraud investigator Reviewed bya publication integrity reviewer Published10 October 2026 Last checked10 October 2026 Reading time8 minutes Sources10 peer-reviewed

A paper mill is a commercial operation that produces and sells fabricated or manipulated manuscripts, data sets, or authorship positions on already-completed papers to researchers who need publications. Unlike an individual case of data fabrication by a single author, a paper mill operates at industrial scale, reusing templates, image sets, and methods sections across many superficially different submissions, often targeting multiple journals simultaneously, which makes the problem fundamentally different from, and in important ways harder to catch than, one-off individual misconduct.

Learning objectives

  • What a 2022 study in the BMJ found when it traced a sample of retracted papers to specific paper mills
  • The specific, recurring templated patterns that distinguish paper-mill output from individual fabrication
  • The detection infrastructure that publishers have developed specifically to identify fraud on the scale of paper mills

Common misconceptions

  • “Fabricated papers are produced individually, so each case is a separate and unrelated incident.” Cristina Candal-Pedreira and colleagues’ 2022 study in the BMJ traced a specific sample of retracted papers to identifiable paper mills and found shared structural features, including reused templates, image sets and methods language, across papers nominally written by different, unconnected authors and submitted to different journals, demonstrating that many apparently separate cases of fabrication originate from the same commercial source.

Findings of a 2022 study tracing retracted papers to their source

The 2022 cross-sectional study by Cristina Candal-Pedreira and colleagues, published in the BMJ, examined a sample of retracted papers and systematically traced a subset to known paper-mill operations, finding that retractions linked to paper mills represented a distinct and measurable category within recent retraction data, separate from honest error or fraud by individual authors1. The methodology of the study relied on identifying shared structural and textual markers across papers with no evident connection between their nominal authors, institutions or original journals, evidence that a single commercial source had generated multiple ostensibly independent manuscripts1. The 2021 Nature news investigation by Holly Else and Richard Van Noorden into the broader paper-mill phenomenon similarly reported that publishers’ internal investigations had identified clusters of hundreds of suspect papers sharing characteristic structural similarities, far beyond what any plausible pattern of independent, coincidental misconduct by unrelated authors could explain2.

Templated features characteristic of paper-mill output

Jana Christopher’s analysis of techniques for detecting paper mills describes a recurring characteristic pattern: methods sections that follow an identical structural template despite nominally describing different experiments, figure panels reused or minimally altered across papers with different titles and author lists, and generic, superficial variation in topic overlaid on an otherwise identical underlying study design3. The related work of Jennifer Byrne and Jana Christopher on gene-function paper mills documented a cluster of cases in cancer biology research in which large numbers of nominally independent papers studying different genes used an identical experimental template and figure layout, varying only the name of the gene, a pattern that would be highly improbable if the papers had been produced by unconnected research teams5. The research of Guillaume Cabanac and Cyril Labbé on “tortured phrases” identifies a textual form of the same pattern, documenting that automated paraphrasing tools used to disguise plagiarised or templated text tend to introduce specific, recognisable substitution patterns that recur across apparently unrelated papers once a search is designed to detect them4.

Detection infrastructure developed by publishers

Because paper-mill output is detectable through these cross-paper patterns, rather than through scrutiny of any single submission in isolation, the response of the publishing industry has focused on shared detection infrastructure across publishers. The STM Integrity Hub, an initiative formed by the International Association of Scientific, Technical and Medical Publishers, was built to allow publishers to screen submissions against a shared database of known paper-mill indicators, image duplicates and suspect manuscript templates, addressing the fact that the editor of any single journal, who sees only that journal’s submissions, cannot detect a pattern that becomes visible only across many journals6. A joint research project of the Committee on Publication Ethics (COPE) and STM investigating paper mills recommended that publishers share information about suspect submissions across companies, while acknowledging that data-protection law and concerns about the false flagging of legitimate authors require careful, deliberate design of any shared blacklisting mechanism7.

The business model underlying paper-mill profitability

Paper mills function because they meet a demand created by career incentives linked to publication: a steady customer base of researchers who need publications faster than legitimate research permits, matched by a mill’s capacity to produce superficially plausible manuscripts cheaply once a reusable template exists. The analysis by Byrne and Christopher of the gene-function paper-mill cluster noted that the underlying economics depend on reuse: the marginal cost of producing a new paper from an existing template and data set is far lower than that of producing a new study, which allows mills to sell large volumes of superficially distinct manuscripts at a price that remains attractive to a customer facing a publication quota5. The Nature investigation by Else and Van Noorden reported that some mills openly advertise services, including guaranteed placement in a specific journal or a guaranteed authorship position for a stated fee, a degree of commercial openness in the mills’ own marketing that itself helped investigators to identify and trace specific operations once systematic inquiry began2. Abalkina’s mapping of a Russian-language paper-mill network similarly found evidence of organised pricing structures and advertised services, supporting the conclusion that these operations function as commercial businesses, albeit illicit ones, rather than as informal arrangements between individuals8. The 2017 consensus report on research integrity by the National Academies of Sciences, Engineering, and Medicine places this commercial model of fraud for hire within a broader finding that responses at the institutional and publisher level, and not only the discipline of individual authors, are necessary once misconduct becomes organised at this scale10.

Scale as the central challenge beyond detection accuracy

The 2023 study by Anna Abalkina mapping a network of Russian-language paper mills found that a single operation could be linked to output appearing simultaneously across many journals and publishers, illustrating that the central challenge is not only to build a more accurate detector for individual papers but to build detection and response systems that operate at the same cross-journal scale that the mills exploit8. A 2022 Nature editorial endorsed wider use of algorithmic screening tools as a necessary response commensurate with this scale, arguing that manual editorial review of single submissions, however careful, structurally cannot detect a fraud operation designed to exploit that limitation by distributing its output thinly across hundreds of different journals9. The mismatch of scale also has a direct financial dimension: review at an individual journal is staffed and funded to detect misconduct by individual authors within one submission, whereas a cross-journal fraud operation effectively distributes its detection risk across every journal it targets, so that no single journal bears a cost proportional to the scale of the problem it is helping to detect. Shared infrastructure such as the STM Integrity Hub addresses this mismatch by pooling the cost of detection in the same way that the fraud itself is distributed, but building and sustaining such infrastructure requires continuing investment and cooperation between publishers well beyond what the editorial budget of any individual journal was designed to provide, which is one reason that industry-wide coordination, rather than action by any single publisher, has become the focus of the response to this category of fraud. For researchers and institutions affected by the problem, the practical implication is that any individual retraction bearing the characteristics of paper-mill output should prompt a check for related output elsewhere, in the same author’s other papers, in recent volumes of the same journal, or in the shared databases that publishers increasingly maintain, rather than being treated as a fully resolved, standalone event once the flagged paper has been addressed. Early-career researchers warrant a specific caution: an approach from a service offering co-authorship of an already completed manuscript for a fee, and an offer of guaranteed publication in a specific journal in exchange for payment beyond standard, transparent open-access fees, are both recognisable patterns of paper-mill solicitation, and a researcher who recognises and reports such an approach, rather than accepting it under career pressure, helps to deprive the underlying business model of the customer base on which it depends. Supervisors and department leaders are often best placed to address this risk in advance, since the early-career researchers under the most acute publication pressure are also the most likely to be targeted by paper-mill solicitations; explicit, proactive guidance from a mentor, rather than an assumption that a trainee already knows how to recognise such approaches, is therefore a meaningful and low-cost preventive measure.

Key points

Key points

Paper mills are not isolated instances of individual fabrication but commercial operations that reuse templates, figures and methods language across many papers sold to different, unconnected authors and submitted to different journals. Their detection therefore requires cross-publisher and cross-journal infrastructure such as the STM Integrity Hub rather than reliance on a single editor’s review of an individual submission.

Practical application

Practical application

  1. Any suspected pattern of templated manuscripts should be reported to a shared detection system, and not only recorded within the journal. A pattern that appears isolated within one journal may prove to be part of a much larger cluster when checked against cross-publisher infrastructure such as the STM Integrity Hub.
  2. Reviewers should be trained to recognise the specific features of paper-mill output. Identical methods structure with only superficial variation in topic, reused figure panels, and generic or uncritical prior peer review are documented warning signs distinct from ordinary single-author fabrication.
  3. Proposals for data sharing to track suspect submissions should be supported. The joint paper-mill research of COPE and STM explicitly recommends cross-publisher information sharing, while also identifying the fairness and data-protection safeguards that such a system requires.

Frequently asked questions

A paper mill is a commercial operation producing or selling fabricated manuscripts, data, or authorship slots at scale, reusing templates, figures, and methods text across many submissions to different authors and journals, whereas individual fabrication involves one author or team manipulating their own specific study.

A 2022 BMJ study identified shared structural and textual markers, including templated methods sections and reused figures, across papers with no obvious connection between their nominal authors or original journals, providing evidence of a shared commercial source.

It is a shared detection infrastructure built by the International Association of Scientific, Technical and Medical Publishers that lets member publishers screen submissions against a shared database of known paper-mill indicators, including image duplicates and suspect manuscript templates, so a pattern invisible within one journal can be caught across the industry.

Paper mills typically distribute their output thinly across many different journals so that no single editor sees enough submissions from one source to notice the pattern; their detection requires visibility across journals and publishers that an individual editor’s submission queue does not provide.

Yes. A 2023 study traced a network of Russian-language paper mills and found the output of a single operation appearing simultaneously across numerous journals and publishers, illustrating the scale at which these operations can function.

References

  1. Candal-Pedreira C, Ross JS, Ruano-Ravina A, Egilman DS, Fernández E, Pérez-Ríos M. Retracted papers originating from paper mills: cross sectional study. BMJ. 2022;379:e071517. read 10 October 2026. View on BMJ
  2. Else H, Van Noorden R. The fight against fake-paper factories that churn out sham science. Nature. 2021;591:516-519. read 10 October 2026. View on Nature
  3. Christopher J. The raw truth about paper mills. FEBS Letters. 2021;595(13):1751-1757. read 10 October 2026. View on FEBS Letters
  4. Cabanac G, Labbé C, Magazinov A. Tortured phrases: A dubious writing style emerging in science. arXiv:2107.06751. read 10 October 2026. View on arXiv
  5. Byrne JA, Christopher J. Digital magic, or the dark arts of the 21st century-how can journals and peer reviewers detect manuscripts and publications from paper mills? FEBS Letters. 2020;594(4):583-589. read 10 October 2026. View on FEBS Letters
  6. STM (International Association of Scientific, Technical and Medical Publishers). STM Integrity Hub. read 10 October 2026. View the STM Integrity Hub
  7. Committee on Publication Ethics and STM. Paper mills research project report. read 10 October 2026. View the COPE/STM paper mills report
  8. Abalkina A. Detecting a network of Russian-language paper mills: A case study. Learned Publishing. 2023;36(3):569-580. read 10 October 2026. View on Learned Publishing
  9. Nature Editorial. Algorithms can spot fake papers. Use them. Nature. 2022;608:9. read 10 October 2026. View on Nature
  10. National Academies of Sciences, Engineering, and Medicine. Fostering Integrity in Research. The National Academies Press, 2017. read 10 October 2026. View the National Academies report

Every source above is a peer-reviewed article, a publisher’s record of one, or a standard issued by the body that owns it. Each carries the date it was last read. Where a standard moves, this article is revised rather than left up with a note.

How to cite this article

Pick your referencing style and copy it. Your university or target journal may vary the punctuation — check its guide if it has one.

Pubrica Academy. (2026, October 10). Paper Mills: The Industrial-Scale Threat Underlying Fabricated Papers in Scientific Publishing. Pubrica. https://pubrica.com/academy/study-guide/research-writing/fake-papers-on-scientific-publishing/

This article is written to be learned from. Cite it if you are referring to what it says; if you are using the evidence behind it, cite the sources listed above instead.

Paper-Mill Pattern Recognition Checklist

This checklist may be used when the content of a submission appears ordinary but its structure raises concern.

[ ] Compared the methods section's structure against other recent submissions for templated similarity
[ ] Checked figures/panels for reuse or minimal alteration against image databases or search tools
[ ] Checked for superficial topic variation layered over an otherwise identical study design
[ ] Checked author-list stability between initial submission and any later correspondence
[ ] Screened text for tortured phrases or signs of automated paraphrasing
[ ] Reported suspected patterns to shared industry detection infrastructure where available

Pubrica AcademyWritten and maintained by Pubrica’s subject matter experts. Articles are revised when the underlying standards change, and each article states the date on which it was last reviewed.

How Pubrica can help

Pubrica’s research integrity team screens manuscripts against known structural and textual features of paper-mill output and advises editorial teams on responding to suspected industrial-scale fabrication.

Find something else

Search the Pubrica Academy

Access is free and requires no account. Enter a topic, or open the full library to filter by category, sub-topic or resource type.

Detection of paper-mill clusters within submission queues

A scoping assessment is free and takes two business days. It provides a written assessment of what the work requires and which specialist would undertake it.

Get a free quote

Regulations

Check your project against this rule

  1. 1Your work
  2. 2Your details
  3. 3Send
What do you need?

Material you send is held under signed confidentiality, with access limited to the assigned team and encrypted transfer. It is not used to train anything and is not passed to third-party tools. Ask for the agreement before you send anything you would rather cover first.