Free scoping read. A written assessment of your manuscript in two business days, at no cost.

Start one
Contents

Academy · Research Writing · Scientific writing in radiology

Scientific writing in radiology, and the article types journals publish

Scientific writing is a reporting format with rules, not a style of prose. In radiology those rules are unusually explicit: Radiology publishes a word allowance for every section of an Original Research article, a maximum reference count, and limits on how large a table may be. Knowing which article type you are writing settles most of the questions authors otherwise agonise over.

Pubrica AcademyWritten by the medical writing and biostatistics teams Reviewed byPubrica biostatistics team Published9 October 2026 Last checked9 October 2026 Reading time12 minutes Sources28 peer-reviewed

Radiologists submitting their first paper usually ask two questions in the wrong order: how should I write this, and what kind of paper is it? The second question determines the first. An original research report, a technical development, a review and a case report are judged against different expectations, carry different word allowances, and need different evidence. Once the type is fixed, the structure, the length and the figure budget largely follow from the journal’s own instructions — and radiology journals state those more precisely than most.

What you will learn

  • What distinguishes scientific writing from other professional writing you already do
  • Which article types a radiology journal publishes, and what each is actually for
  • The real submission limits: 3,000 words, a 300-word abstract, 35 references, and section-by-section allowances
  • Hard limits on tables — one page, no more than 40 rows and 6 to 8 columns
  • The paragraph architecture of a typical radiology manuscript: about 18 paragraphs across five sections
  • How to write an abstract that leads with the finding rather than burying it

What to unlearn

  • “Scientific writing means formal, impersonal prose.” Tone is the least of it. Scientific writing is defined by being checkable: a reader must be able to see what was done, to whom, and what happened, and disagree with your interpretation separately from your data.
  • “A case report is the easy option for a first paper.” It is a different genre with its own demands — what makes the case reportable, what was learned, and why it generalises. Many journals publish few or none.
  • “Word limits are guidance.” At Radiology the allowance is broken down by section — 400 words of introduction, 800 of methods, 1,000 of results, 800 of discussion. That is an editorial statement about priorities, not a formatting preference.
  • “More tables and images make a stronger paper.” Each main table must fit on one page and should carry no more than 40 rows and 6 to 8 columns. A table that breaks those limits is usually two tables, or a figure.
  • “Rejection means the paper will not be published.” Kliewer reported that 82% of papers submitted to the American Journal of Roentgenology were eventually published, in that journal or elsewhere.

What scientific writing actually is

Radiologists write a great deal: reports, protocols, teaching material, referral letters. Scientific writing differs from all of these in one respect. Its purpose is to let a stranger judge a claim, which means every element exists to make something checkable rather than to make it persuasive. A diagnostic report tells a clinician what you concluded. A research paper has to let a reader decide whether your conclusion follows from what you did.

That requirement produces the conventions people mistake for style. The methods are detailed because a reader must be able to assess bias, not because detail is a virtue. The results carry numbers rather than adjectives because “markedly improved” cannot be pooled, replicated or disagreed with. Interpretation is quarantined in the discussion because a reader needs to separate your data from your reading of it. Sollaci and Pereira, in the Journal of the Medical Library Association, documented how recently this settled into a standard: across 1,297 original articles from the BMJ, JAMA, The Lancet and the New England Journal of Medicine sampled from 1935 to 1985, no article in the 1935 sample used the Introduction–Methods–Results–Discussion structure, while by the 1970s it exceeded 80% of original papers 20.

The corollary is useful: a well-written paper in this sense is one whose weaknesses are visible. Authors who try to write defensively, obscuring the limitations, produce manuscripts that reviewers trust less rather than more. Our guide to the structure of a medical paper works through what each section is for.

Why radiology is a particular case

Three features of radiological research shape how it has to be reported. The first is that the evidence is often an image, which means the figure is not an illustration of the finding — it frequently is the finding. Image selection, windowing, annotation and scale therefore belong to the methods in a way that a bar chart does not, because the choice of which slice to show is a choice about what the reader sees.

The second is that much radiological research is about observers rather than patients. Diagnostic accuracy studies, reader studies and inter-reader agreement work all have a human instrument in the measurement chain, so the number of readers, their experience, their blinding, the reading order and the reference standard all become methods items that a reviewer will specifically hunt for. Bannas and Reeder set out these expectations for authors in European Radiology 10.

The third is equipment and technique. A result obtained on one scanner with one sequence at one field strength is a result about that configuration until shown otherwise. Reporting the hardware, the acquisition parameters and the reconstruction is not pedantry; it is the only thing that lets a reader judge whether the finding would transfer to their department. Where the study involves algorithmic image analysis, the same logic extends to the model, its training data and its validation — covered on our AI in imaging hub.

The article types a radiology journal publishes

Journals differ, and the authoritative list is always the one in your target journal’s current instructions. The categories below are the ones that recur across radiology titles, and the distinction that matters is what kind of claim each type is allowed to make.

Original research reports a study designed to answer a question, and is the only type that may make a primary empirical claim. Technical development papers describe a new or modified technique, with the emphasis on feasibility and characterisation rather than on clinical outcome. Reviews come in two quite different forms: a narrative review synthesises a field for a reader who needs orientation, while a systematic review answers a defined question using a pre-specified search and appraisal method and is reported against PRISMA 2020, as Page and colleagues set out in the BMJ 5. Treating one as the other is a common and costly category error — see our systematic review service page for the distinction.

Case reports and case series describe what was observed in one or a few patients; the claim they support is existence, not frequency. Educational and how-to articles teach a technique or an interpretive approach. Editorials, commentaries and letters argue a position or respond to published work, and are usually invited or short. Guidelines, consensus statements and position papers carry the authority of a society rather than of a study, and have their own development and reporting expectations.

Pick the type before you draft. Almost every question about length, structure and how much evidence is enough is answered by the type, and choosing wrongly is a journal selection problem that no amount of revision fixes.

Article types in radiology journals and the claim each supports

TypeWhat it is forThe strongest claim it can support
Original researchReports a study designed to answer a stated questionA primary empirical claim, within the limits of the design
Technical developmentDescribes a new or modified technique or sequenceFeasibility and measured performance of the technique
Narrative reviewOrients a reader in a field or topicA reasoned synthesis; not an estimate of effect
Systematic review / meta-analysisAnswers a defined question using a pre-specified search and appraisalA pooled estimate, reported against PRISMA 2020
Case report / case seriesDescribes what was observed in one or a few patientsExistence — that this can occur; never frequency
Educational / how-toTeaches a technique or an interpretive approachPractice guidance, grounded in cited evidence
Editorial / commentary / letterArgues a position or responds to published workAn argued opinion, usually invited and short
Guideline / consensus statementSets out agreed practice on behalf of a society or panelConsensus, with the method of reaching it reported

Categories compiled from journal author instructions and from author-facing guidance by Bannas P, Reeder SB (European Radiology) and Kliewer MA (American Journal of Roentgenology). The authoritative list is always the current instructions of your target journal; no two titles use identical category names.

The real submission limits

Radiology’s author instructions are worth reading even if you are submitting elsewhere, because they publish the allowance section by section rather than only as a total 27. An Original Research article is capped at 3,000 words, divided into a 300-word abstract, a 400-word introduction, 800 words of materials and methods, 1,000 words of results and 800 words of discussion 27. The title may run to 15 words, the summary statement to 30, and the key results to 75. No more than 35 references are permitted.

Read as a statement of priorities, that allocation says several things. Results get the largest share, so a paper whose discussion outweighs its results is signalling that the findings are thin. Methods and discussion get the same allowance. The introduction gets 400 words — enough for context, gap and purpose, and not enough for a literature review. The 35-reference cap forces a decision about which prior work the argument genuinely rests on rather than which work you read.

The 30-word summary statement is the most useful constraint in the list. If you cannot state your paper’s claim in 30 words, you either have more than one paper or you have not yet decided what the claim is. Write it first, before the manuscript, and revise it as the analysis settles.

3,000words total for an Original Research article
300words for the abstract
1,000words for results — the largest single allowance
35references maximum

Submission limits for Original Research. Source: Radiology scientific style guide and author instructions, Radiological Society of North America. Limits are journal-specific; check your target journal’s current instructions.

Tables and figures have limits too

Authors often treat tables as overflow storage for data that would not fit in the results. Journal instructions do not. Radiology requires that each table fit on a single page, and specifies that main tables should carry no more than 40 rows and 6 to 8 columns 27. Tables and figures are numbered in order of first appearance in the text, which means the order of your results section determines the numbering rather than the other way round 27.

Those limits are a design constraint worth welcoming. A table of 60 rows is almost always two tables with different purposes, or one table plus a figure. A table of twelve columns usually contains two comparisons that would each be clearer alone. And a table that duplicates numbers already in the text creates two places for a discrepancy to appear, which reviewers find reliably.

For image figures the question is different: can a reader see what you are claiming to show? That means a scale or scale bar, an arrow or outline where the finding is subtle, the sequence and parameters in the legend, and consistent windowing across panels being compared. Manuscript formatting covers the mechanics of resolution, labelling and file preparation.

Table and figure constraints, and what each one is really asking you to decide

ConstraintStated limitWhat it means in practice
Table size on the pageMust fit on a single pageIf it does not, it is two tables or a figure
Rows in a main tableNo more than 40Rows beyond this are usually a second comparison
Columns in a main table6 to 8More columns almost always means two tables
NumberingOrder of first appearance in the textThe order of your results section fixes the numbering

Radiology scientific style guide and author instructions, Radiological Society of North America. Other journals set different limits; the construction logic transfers regardless.

The paragraph architecture underneath the word count

Word budgets tell you how much space you have; they do not tell you how to divide it. Kliewer, in the American Journal of Roentgenology, describes the shape of a typical radiology manuscript concretely: around 18 paragraphs across five sections, with three introduction paragraphs leading to the purpose statement and five discussion paragraphs before the closing summary 19.

That is a more usable plan than a word count. Three introduction paragraphs means one for the accepted position, one for the specific gap, one for the purpose — and forces you to decide what the gap is rather than writing around it. Five discussion paragraphs maps naturally onto the principal finding, how it sits against existing work, a plausible explanation, the limitations, and what should happen next 19.

Kliewer also notes that a manuscript typically takes around four drafts before it is any good, which is worth knowing early. The first draft exists to find out what the paper is about; it is not a failed final draft.

The abstract: lead with the finding

Within a 300-word allowance, the commonest mistake is spending the first third restating what everyone in the field already knows and the last line hedging the result into invisibility 27. An abstract that buries the finding is read by editors and search engines as a paper without one.

The same study, abstracted two ways (a constructed specimen — the figures are illustrative, not findings from a real study)

Buries the finding

Incidental findings on cross-sectional imaging are increasingly common and present a well-recognised management challenge. Several approaches to risk stratification have been proposed, but consensus is lacking and practice varies considerably between institutions. We therefore sought to investigate the performance of a structured reporting template in this setting. Patients undergoing CT over a two-year period were reviewed and outcomes were compared between groups. Our results were encouraging and suggest that structured reporting may have a role. Further work in larger cohorts is warranted before firm conclusions can be drawn.

The first 60 words say nothing specific. Every reader in the field already knows incidental findings are a management problem.

No number anywhere. “Encouraging” and “may have a role” cannot be compared with any other study.

No design, setting or sample size. An editor reading quickly cannot tell whether this is a case series or a cohort of thousands.

The outcome is never named. “Outcomes were compared between groups” leaves the primary outcome unstated.

The closing hedge removes the finding. “Before firm conclusions can be drawn” invites the editor to agree and stop reading.

Leads with it

Structured reporting reduced the proportion of incidental findings receiving no documented follow-up plan from 38.2% to 11.4% (difference 26.8 percentage points; 95% CI 19.1 to 34.5; P<0.001). In a retrospective cohort of 1,204 consecutive CT examinations at a single centre, 612 reported with a free-text template and 592 with a structured template, two radiologists blinded to template type adjudicated follow-up documentation. Structured reporting closed most documentation gaps for incidental findings; the design cannot establish whether patient outcomes improved.

The primary outcome, with both proportions, the difference, the interval and the test, is in the first sentence.

Design, setting, sample size and group sizes follow, so the claim can be weighed immediately.

The measurement process — blinded adjudication by two radiologists — is stated, which is what a reviewer looks for in a reader-dependent outcome.

The limitation is specific and structural (documentation, not patient outcome) rather than a generic hedge.

Both versions fit comfortably inside a 300-word abstract allowance; the second simply spends the words differently. It leads with the number, states the design well enough to be judged, and replaces a hedge that erases the finding with a limitation that bounds it. Within a word budget, everything you spend on background you take away from the result.

What happens after you submit, and what is not known

One figure is worth holding on to. Kliewer reported that 82% of papers submitted to the American Journal of Roentgenology were eventually published, either in that journal or elsewhere 19. A rejection from a first-choice journal is, statistically, an interim event rather than a verdict 19. That figure is from a single journal and was published in 2005, so treat it as an order of magnitude rather than a current rate — but the direction is clear enough to be worth remembering when the first decision arrives.

Against that, the attrition at the front end is substantial. Jawaid and Jawaid, in Pakistan Journal of Medical Sciences, report that between 70% and 80% of submissions to their journal are not processed further after initial screening and the editor’s triage, and list 17 distinct reasons for rejection without external peer review 20. Most of those concern the question, the design and the reporting rather than the writing 6. The two findings are consistent: a great deal is screened out quickly, and a great deal of what is screened out is published somewhere in the end.

What is not well established is anything about radiology specifically. We found no published audit of acceptance or rejection patterns across radiology journals as a group, no evidence on whether the article-type distinctions above affect acceptance odds, and no trial of writing support in this field. Where this page states a figure it is from a named journal or a named study; where it does not, that is because the evidence does not exist rather than because we have left it out. Treat departmental folklore about which journal is “easier” with the scepticism it deserves.

How this is actually learned

Scientific writing is a skill with a training literature, and the findings are modest but consistent. Fernandez and colleagues, in BMJ Open, followed 27 editions of a 15-hour, two-day scientific writing course held in Spain between 2004 and 2013, attended by 741 students 27. Mean overall satisfaction was 4.6 out of 5, and self-rated gains on a 0–4 scale were 1.6 points for knowledge, 1.3 for attitudes and 1.4 for skills, all at P<0.001. Those are self-reported gains, not publication outcomes, and the authors are clear about that distinction 28.

Approaches that put trainees in contact with real manuscripts appear to work better than instruction alone. Bloothooft and colleagues, in BMC Medical Education, describe an example-based publishing programme for bachelor medical students built around reviewing real papers 2. Pasarica and colleagues, in Cureus, report on launching a university journal as a way of raising student publication productivity 7. In medical radiation science education specifically, Arruzza, Chau and Kilgour’s scoping review in Radiography maps how problem-based learning has been applied, which is the nearest thing to a radiology-specific evidence base on the teaching side 3.

None of this establishes that training raises acceptance rates. What it supports is narrower: structured exposure to real manuscripts improves what people know and how confident they are, and reading papers as a reviewer would is the cheapest form of that exposure available to you 2,28. Our peer review page covers how to read a paper the way a reviewer does.

Take-home message

Take-home message

Scientific writing is defined by being checkable, not by tone: a reader must be able to see what was done and disagree with your interpretation separately from your data. In radiology the format rules are unusually explicit, and they are a planning tool rather than a constraint — 3,000 words for Original Research at Radiology, split 400/800/1,000/800 across introduction, methods, results and discussion, with a 300-word abstract, a 30-word summary statement and a maximum of 35 references, plus tables capped at one page, 40 rows and 6 to 8 columns. Decide the article type first, because it settles the length, the structure and how much evidence is enough. And keep Kliewer’s figure in view: 82% of papers submitted to the American Journal of Roentgenology were eventually published somewhere.

How to apply this to your study

How to apply this to your own study

  1. Name the article type before you write a word. Original research, technical development, review, systematic review, case report, educational, correspondence or guideline — taken from your target journal’s current instructions, not from memory.
  2. Write the 30-word summary statement first. If the claim will not fit, you have more than one paper or you have not decided what the claim is.
  3. Build the word budget by section, not as a total. Use the published split as a template: results largest, methods and discussion equal, introduction smallest.
  4. Plan paragraphs, not just words. Three introduction paragraphs to the purpose statement, five discussion paragraphs before the summary, roughly 18 in all.
  5. Audit each table against the limits. One page, 40 rows, 6 to 8 columns. Anything larger is two tables, or a table plus a figure.
  6. Check that figure numbering follows first mention. If it does not, the results section is probably out of order.
  7. For any reader-dependent outcome, report the human instrument. Number of readers, experience, blinding, reading order and reference standard.
  8. Report the equipment and acquisition parameters. Scanner, field strength, sequence and reconstruction, so a reader can judge whether the finding transfers to their department.
  9. Rewrite the abstract to open with the primary outcome and a number. Then cut whatever background the word count can no longer afford.

Common questions

A radiology report tells a clinician what you concluded. A scientific paper has to let a stranger judge whether your conclusion follows from what you did, and that single difference generates all the conventions. Methods are detailed so a reader can assess bias. Results carry numbers rather than adjectives because “markedly improved” cannot be pooled or replicated. Interpretation is confined to the discussion so a reader can separate your data from your reading of it. The test of good scientific writing is not elegance but whether the weaknesses of the work are visible to someone who did not do it.

Most radiology titles publish some version of the following: original research, technical development or technical note, narrative review, systematic review or meta-analysis, case report and case series, educational or how-to articles, editorials, commentaries and letters, and society guidelines or consensus statements. Category names differ between journals, so the authoritative list is always the current author instructions of the journal you are targeting. The distinction that matters is what claim each type may make — original research can make a primary empirical claim, a case series can establish that something occurs but never how often, and a narrative review synthesises without estimating an effect.

They are journal-specific, but Radiology publishes an unusually detailed allowance for Original Research: 3,000 words overall, comprising a 300-word abstract, a 400-word introduction, 800 words of materials and methods, 1,000 words of results and 800 words of discussion, with a 15-word title, a 30-word summary statement, 75 words of key results and a maximum of 35 references. Treat the proportions as transferable even where the totals differ: results get the largest share, methods and discussion are equal, and the introduction is deliberately short. Build your budget section by section before drafting rather than cutting a finished draft.

Radiology requires each table to fit on a single page and specifies that main tables carry no more than 40 rows and 6 to 8 columns. Tables and figures are numbered in order of first appearance in the text, which means your results section determines the numbering. Those limits are worth treating as design advice rather than bureaucracy: a 60-row table is nearly always two tables with different purposes, and a twelve-column table usually contains two comparisons that would each be clearer presented separately. Avoid duplicating the same numbers in text and table, because that creates two places for a discrepancy to appear.

It can be, but not because it is easier. A case report is a distinct genre with its own demands: what makes this case reportable, what was learned, why it generalises beyond the one patient, and what the imaging actually shows that a reader could not infer otherwise. Many journals publish few case reports or none, so check before you invest the effort, and expect the images to carry most of the argument. The claim a case report supports is existence — that this can happen — never frequency, and reviewers are quick to flag reports that overreach into prevalence or causation.

Usually yes. Kliewer, in the American Journal of Roentgenology, reported that 82% of papers submitted to that journal were eventually published, either there or in another venue. That is a single journal and the figure dates from 2005, so read it as an order of magnitude rather than a current rate. At the same time the front-end attrition is real: Jawaid and Jawaid, in Pakistan Journal of Medical Sciences, found that between 70% and 80% of submissions to their journal were not processed further after initial screening and triage, across 17 distinct recorded reasons. Sort the decision letter into objections you can answer and objections settled at the design stage before deciding where to go next.

More than you want to. Kliewer puts it at around four drafts before a manuscript is good, on a typical shape of about 18 paragraphs across five sections. The first draft is best understood as a way of discovering what the paper is about rather than as a failed final version, which is why it is worth drafting the 30-word claim before the manuscript and revising it as the analysis settles. The useful implication is procedural: budget time for redrafting rather than for proofreading, because the expensive problems are structural and the cheap ones are not.

There is no evidence that establishes that, and it is worth saying plainly. What the training literature shows is improvement in self-rated knowledge and confidence. Fernandez and colleagues, in BMJ Open, followed 741 students across 27 editions of a 15-hour course and found mean satisfaction of 4.6 out of 5 and self-rated gains of 1.6 points for knowledge, 1.3 for attitudes and 1.4 for skills on a 0–4 scale, all significant at P<0.001 — but these are self-reports, not publication outcomes. Example-based approaches that put trainees in front of real manuscripts, as described by Bloothooft and colleagues in BMC Medical Education, are the most promising, and reading papers as a reviewer would is the cheapest version available.

References and sources

  1. International Committee of Medical Journal Editors (ICMJE). Recommendations for the Conduct, Reporting, Editing, and Publication of Scholarly Work in Medical Journals. 2026. read 9 October 2026. icmje.org
  2. Bloothooft M, Pennings HJM, van der Heyden MAG. The Utrecht University Honours Program review project: example based scientific publishing training aimed at bachelor medical students. BMC Medical Education. 2024;24(1):1-12. doi:10.1186/s12909-024-05098-7 read 9 October 2026. doi.org/10.1186/s12909-024-05098-7
  3. Arruzza E, Chau M, Kilgour A. Problem-based learning in medical radiation science education: a scoping review. Radiography. 2023;29:564-572. read 9 October 2026. frontiersin.org
  4. Borowiec BG. Ten simple rules for scientists engaging in science communication. PLOS Computational Biology. 2023;19(7):e1011251. doi:10.1371/journal.pcbi.1011251 read 9 October 2026. doi.org/10.1371/journal.pcbi.1011251
  5. Page MJ, McKenzie JE, Bossuyt PM, et al. The PRISMA 2020 statement: an updated guideline for reporting systematic reviews. BMJ. 2021:n71. doi:10.1136/bmj.n71 read 9 October 2026. doi.org/10.1136/bmj.n71
  6. Jawaid SA, Jawaid M. Common reasons for not accepting manuscripts for further processing after editor's triage and initial screening. Pakistan Journal of Medical Sciences. 2019;35(1):1-3. doi:10.12669/pjms.35.1.28 read 9 October 2026. doi.org/10.12669/pjms.35.1.28
  7. Pasarica M, Bailey M, Cendan JC. Increasing students' publication productivity: could launching a university scientific journal be a catalyst? Cureus. 2019;11(1):e3953. doi:10.7759/cureus.3953 read 9 October 2026. doi.org/10.7759/cureus.3953
  8. Sterne JAC, et al. RoB 2: a revised tool for assessing risk of bias in randomised trials. BMJ. 2019;366:l4898. read 9 October 2026. frontiersin.org
  9. Fujita MSL, Agustin-Lacruz MdC, Terra AL. Journals' guidelines about title, abstract and keywords: an overview of Information Science and Communication Science areas. European Science Editing. 2018;44(4):76-79. read 9 October 2026. europeanscienceediting.org.uk
  10. Bannas P, Reeder SB. How to write an original radiological research manuscript. European Radiology. 2017;27(11):4455-4460. doi:10.1007/s00330-017-4879-8 read 9 October 2026. doi.org/10.1007/s00330-017-4879-8
  11. Wager E, Woolley K, Adshead V, Cairns A, Fullam J, Gonzalez J, Grant T, Tortell S. Awareness and enforcement of guidelines for publishing industry-sponsored medical research among publication professionals: the Global Publication Survey. BMJ Open. 2014;4(4):e004780. doi:10.1136/bmjopen-2013-004780 read 9 October 2026. doi.org/10.1136/bmjopen-2013-004780
  12. von Elm E, Altman D, Egger M, Pocock S, Gotzsche P, Vandenbroucke J. The STROBE (Strengthening the Reporting of Observational Studies in Epidemiology) statement: guidelines for reporting observational studies. International Journal of Surgery. 2014. doi:10.1016/j.ijsu.2014.07.013 read 9 October 2026. doi.org/10.1016/j.ijsu.2014.07.013
  13. Guyatt G, Oxman AD, Akl EA, et al. GRADE guidelines: 1. Introduction - GRADE evidence profiles and summary of findings tables. Journal of Clinical Epidemiology. 2011;64(4):383-394. read 9 October 2026. link.springer.com
  14. Schulz KF, Altman DG, Moher D. CONSORT 2010 Statement: updated guidelines for reporting parallel group randomised trials. Trials. 2010;11(1). doi:10.1186/1745-6215-11-32 read 9 October 2026. doi.org/10.1186/1745-6215-11-32
  15. Mokkink LB, Terwee CB, Patrick DL, et al. The COSMIN study reached international consensus on taxonomy, terminology, and definitions of measurement properties for health-related patient-reported outcomes. Journal of Clinical Epidemiology. 2010;63(7):737-745. doi:10.1016/j.jclinepi.2010.02.006 read 9 October 2026. doi.org/10.1016/j.jclinepi.2010.02.006
  16. Kuper A, Reeves S, Levinson W. An introduction to reading and appraising qualitative research. BMJ. 2008;337:a288. read 9 October 2026. link.springer.com
  17. Guyatt GH, Oxman AD, Vist GE, et al. GRADE: an emerging consensus on rating quality of evidence and strength of recommendations. BMJ. 2008;336(7650):924-926. read 9 October 2026. link.springer.com
  18. von Elm E, Altman DG, Egger M, Pocock SJ, Gotzsche PC, Vandenbroucke JP, et al. Strengthening the reporting of observational studies in epidemiology (STROBE) statement: guidelines for reporting observational studies. BMJ. 2007;335(7624):806-808. doi:10.1136/bmj.39335.541782.AD read 9 October 2026. doi.org/10.1136/bmj.39335.541782.AD
  19. Kliewer MA. Writing it up: a step-by-step guide to publication for beginning investigators. American Journal of Roentgenology. 2005;185:591-596. read 9 October 2026. tech.snmjournals.org
  20. Sollaci LB, Pereira MG. The Introduction, Methods, Results, and Discussion (IMRAD) structure: a fifty-year survey. Journal of the Medical Library Association. 2004;92(3):364-371. read 9 October 2026. genreacrossborders.uwaterloo.ca
  21. International Committee of Medical Journal Editors. Uniform requirements for manuscripts submitted to biomedical journals. Annals of Internal Medicine. 1997;126(1):36-47. read 9 October 2026. stat.cmu.edu
  22. Vickery B. The Royal Society Scientific Conference of 1948. Journal of Documentation. 1992;54(3):281-283. read 9 October 2026. stat.cmu.edu
  23. Atkinson D. The evolution of medical research writing from 1735 to 1985: the case of the Edinburgh Medical Journal. Applied Linguistics. 1992;13(4):337-374. read 9 October 2026. stat.cmu.edu
  24. Huth EJ. Structured abstracts for papers reporting clinical trials. Annals of Internal Medicine. 1987;106(4):626-627. read 9 October 2026. stat.cmu.edu
  25. Meadows AJ. The scientific paper as an archaeological artifact. Journal of Information Science. 1985;11(1):27-30. read 9 October 2026. stat.cmu.edu
  26. Bazerman C. Modern evolution of the experimental report in physics: spectroscopic articles in Physical Review, 1893-1980. Social Studies of Science. 1984;14:163-196. read 9 October 2026. stat.cmu.edu
  27. Radiology (Radiological Society of North America). Radiology scientific style guide and author instructions: scientific editing. Radiology. read 9 October 2026. pubs.rsna.org
  28. Fernandez E, Garcia AM, Seres E, Bosch F. Students' satisfaction and perceived impact on knowledge, attitudes and skills after a 2-day course in scientific writing: a prospective longitudinal study in Spain. BMJ Open. 8(1):e018657. read 9 October 2026. bmjopen.bmj.com

Every source above is a peer-reviewed article, a publisher’s record of one, or a standard issued by the body that owns it. Each carries the date it was last read. Where a standard moves, this article is revised rather than left up with a note.

How to cite this article

Pick your referencing style and copy it. Your university or target journal may vary the punctuation — check its guide if it has one.

Pubrica Academy. (2026, October 9). Scientific writing in radiology, and the article types journals publish. Pubrica. https://pubrica.com/academy/journal-selection/what-is-scientific-writing-how-is-it-significant-to-radiology-and-list-out-the-types-of-scientific-paper-in-healthcare-industriesresearch-service/

This article is written to be learned from. Cite it if you are referring to what it says; if you are using the evidence behind it, cite the sources listed above instead.

Pre-drafting plan for a radiology manuscript

Complete this before you draft. The word targets come from your journal’s own instructions; the proportions shown in brackets follow the published split for an Original Research article at a journal that states one. Any line you cannot fill is a decision you have not yet made.

RADIOLOGY MANUSCRIPT PLAN

ARTICLE TYPE (from the journal's current instructions)
  [ ] Original research      [ ] Technical development
  [ ] Narrative review       [ ] Systematic review / meta-analysis
  [ ] Case report / series    [ ] Educational / how-to
  [ ] Editorial / letter      [ ] Guideline / consensus statement
  Target journal: ______________________
  Total word limit: ______   Reference limit: ______

TITLE (<= 15 words): ___________________________________________

SUMMARY STATEMENT (<= 30 words) - write this FIRST:
  ______________________________________________________________

KEY RESULTS (<= 75 words) - the load-bearing numbers only:
  1. ___________________________________________________________
  2. ___________________________________________________________
  3. ___________________________________________________________

WORD BUDGET
  Abstract ........ ____  (10% of total)
  Introduction .... ____  (13%)   - 3 paragraphs to the purpose statement
  Methods ......... ____  (27%)
  Results ......... ____  (33%)
  Discussion ...... ____  (27%)   - 5 paragraphs before the summary
  Target total paragraphs: ~18 across 5 sections

METHODS ITEMS SPECIFIC TO IMAGING RESEARCH
  [ ] Scanner make, model and field strength
  [ ] Acquisition parameters and reconstruction method
  [ ] Contrast agent, dose and timing, if used
  [ ] Reference standard, and how it was established
  [ ] Number of readers and their experience level
  [ ] Reader blinding, and to what
  [ ] Reading order, and whether randomised
  [ ] Inter-reader agreement statistic to be reported
  [ ] Reporting guideline for this design: ______________________

TABLES AND FIGURES
  Table 1 ... purpose: _______________  rows: ___  columns: ___
  Table 2 ... purpose: _______________  rows: ___  columns: ___
  [ ] Every table fits one page, <= 40 rows, 6-8 columns
  [ ] Numbering follows order of first mention in the text
  [ ] Every image figure has scale, annotation where the finding is subtle,
      and sequence/parameters in the legend
  [ ] Windowing consistent across panels being compared
  [ ] No number duplicated loosely between text and table

ADMINISTRATIVE
  [ ] Ethics approval and consent statements
  [ ] Each listed author meets all four ICMJE criteria
  [ ] Non-qualifying contributors acknowledged, writing support included
  [ ] Funding and conflicts declared

Pubrica AcademyWritten and maintained by the subject matter experts of Pubrica who do this work. Articles are revised when the standard underneath them moves, and each one carries the date it was last checked.

How Pubrica helps

Pubrica’s medical writers and subject editors work on radiology manuscripts against the target journal’s own instructions: article type, section-by-section word budget, table and figure limits, and the methods items a reader study or diagnostic accuracy paper has to supply. Where the manuscript is structurally sound but over length, we cut to the allowance without losing the claim; where the claim itself is unclear, we say so before you spend more time on the prose.

Find something else

Search the rest of the Academy.

Open with no account. Type what you are working on, or open the full library to filter by category, sub-topic or resource type.

Tell us which journal and which article type, and we will plan the manuscript to its limits.

A scoping read costs nothing and takes two business days. You get a written view of what the work needs and who would hold it.

Get a free quote

Regulations

Check your project against this rule

  1. 1Your work
  2. 2Your details
  3. 3Send
What do you need?

Material you send is held under signed confidentiality, with access limited to the assigned team and encrypted transfer. It is not used to train anything and is not passed to third-party tools. Ask for the agreement before you send anything you would rather cover first.